• Aluminium bar used to support Expanda brochure holders on a wall
  • Overall length: 1125mm
  • Height of bar: 45mm
  • Screw mounted to wall (fittings not supplied)

This is the simple way to produce your own wall mounted brochure holder system..one that will take different sized brochure or postcard holders and that can be expanded upon at any time.

The aluminium bar is simply screwed to a wall, and then the desired brochure holders are hung off it.

You can mix and match your holders to suit; however, as a guide, here are the maximum number of holders you'll fit of the same size across this 1125mm bar:

  • 5 x A4
  • 7 x A5
  • 10 x Trifold (or DL)
  • 6 x landscape postcard size
  • 9 x portrait postcard size

Keep in mind that once a brochure holder is hung from the bar, more brochure holders can then be hung from this original holder, so you can increase the size of your display to suit your requirements. We do, however, suggest going no more than 4 or 5 holders deep, as each additional row pushes that column out from the wall. We also suggest using a Universal Base Bracket (AEXUBB) on every third row of holders in order to stabilise the array.

So when designing your wall mount requirements, if you keep in mind the size of the brochure holders needed, it's a simple matter of calculating how many of those holders you need to display, and then working out which aluminium bar would do the job. To assist you, here are the exact widths of all the Expanda brochure and postcard holders:

  • A4: 225mm
  • A5: 160mm
  • DL (trifold): 110mm
  • Landscape postcard: 180mm
  • Portrait postcard: 125mm

By way of example, 7 x A5 brochure holders equal a total length of 1120 mm, and these would fit easily on this 1125mm wall bracket.

Please contact us should you need further assistance with the makeup of your wall mounted brochure holder system.

Shipping Weight 0.4600kg
Shipping Width 0.010m
Shipping Height 1.130m
Shipping Length 0.043m
Shipping Cubic 0.000480000m3

More From This Category